BCYXB - BOSTIK 400-3 BASE X-304 & CA-118 CATALYST
- MSDS: BCYXB
- Manufacturer: AKZO COATINGS INC
- Product Name: BOSTIK 400-3 BASE X-304 & CA-118 CATALYST
- National Stock Number: 8010-00-107-2269
Product Identification
Product ID:BOSTIK 400-3 BASE X-304 & CA-118 CATALYST
MSDS Date:01/01/1985
FSC:8010
NIIN:00-107-2269
MSDS Number: BCYXB
Responsible Party
ORANGE, CA 92661
US
Emergency Phone: 714-637-1750; CHEMTREC 800-424-9300
Info Phone: 714-637-1750
Cage: 98502
Contractor
Telephone: 714-637-1750; CHEMTREC 800-424-9300
Cage: 98502
Ingredients
HYDROCARBON SOLVENTS (XYLENE, TOLUENE, MEK, MIBK, MNBK,
Fraction By Weight: 49.7%
ACGIH TLV: 100-200PPM
CELLOSOLVE, ISOPROPYL ALCOHOL)
Fraction By Weight: _
ACGIH TLV: _
EPOXY RESIN
Fraction By Weight: 24.3%
AMINE CURING AGENT
Fraction By Weight: 4%
Hazards
Effects of Overexposure:BREATHING VAPOR WILL BE IRRITATING TO NOSE &
THROAT. MAY CAUSE NAUSEA AND VOMITING.
First Aid
First Aid:SKIN: WASH AFFECTED AREA WITH SOAP & WATER. EYES: FLUSH WITH
WATER. CONSULT PHYSICIAN. INHALATION: REMOVE VICTIM TO FRESH AIR.
CONSULT PHYSICIAN. INGESTION: INDUCE VOMITING. CONSULT PHYSICIAN.
Fire Fighting
Flash Point:23F, T.C.C.
Lower Limits:1.1
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL; ALCOHOL-TYPE FOAM
Fire Fighting Procedures:WATER MAY USED AS FINE SPRAY TO ABSORB HEAT
Unusual Fire/Explosion Hazard:DO NOT APPLY TO HEATED SURFACES OR IN
AREAS WHERE ELECTRICAL SPARKS MAY BE PRESENT.
Accidental Release
Spill Release Procedures:ABSORB MATERIAL WITH SAWDUST OR OIL ABSORBING
COMPOUND. WASH AREA WITH DETERGENT ANDATER. USE ADEQUATE
VENTILATION TO CLEAR FUMES FROM AREA. AVOID SPARKS.
Handling
Other Precautions:STORE UNDER 100F.
Exposure Controls
Respiratory Protection:AIR SUPPLIED RESPIRATOR OR SUITABLE CHEMICAL
CARTRIDGE
Ventilation:FRESH AIR REQUIREMENTS WILL BE 18,000-20,000 CFM
Protective Gloves:SOLVENT RESISTN
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:COVERALLS, APRON, NON-SPARKING TOOLS.
Supplemental Safety and Health
ALSO CONTAINS SUSPENSION AND FLOW CONTROL ADDITIVES, 20% COLOR PIGMENT.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:170-340F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STORAGE AT HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, COMBUST. PRODUCTS OF
VARIOUS PIGMENTS
Disposal
Waste Disposal Methods:INCINERATE WITH CARE. SANITARY LAND FILL
PREFERRED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.